GTB Plastology

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

 
Our organization is well known in the market for providing a broad assortment of Dispersion Kneader Machine Tilting Worm Gear to our clients. These products are manufactured using high quality tested components.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line 

Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.

MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER: 

Mixing Chamber:

Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.

Mixing Rotors:

Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.

Pressure Lid:

Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)

Dust Seal:

Designed specifically to maintain the environment clean, and easily changed.

Applications

• Automobile oil seals, body seals, gaskets, belts, hoses and tubes
• Rubber for Electric wires
• Conveyor Belts & Power transmission belts
• Rubberized Rolls
• Rubber-based products such as plugs, caps, gloves, and dental supplies for the medical line